SH125i ABS eSP (2013)

The 164cc, 60mm eSP cylinder kit is specially made for the new HONDA SH125i ABS (2013) eSP (enhanced Smart Power) engine to use in combination with the standard 125cc cylinderhead (27/22mm valves).


The piston that comes with the kit is a high-end piston, made of a special aluminum alloy for racing applications and only relased after hours and hours of intensive testing.
If you are not a racer, then you still will have the benefit from the level of this kind of pistons because they make you able to have long non stop distance rides on motorways with a remarkable increase concerning durability and reliability.
This piston has been shaped to deliver best performance in combination with the original 125cc cylinderhead chamber and the 22/27mm valves.
The Yuminashi Billet CNC X250RR 8.6 Camshaft is recommended in combination with this cylinder kit together with the 2-Valve Spring Racing Conversion Set to get the full potential uit of this 164cc Light Bore cylinder kit. 

This 164cc Light Bore Kit can also be installed on the first generation PCX125 engines and of course on all other new Honda 125cc eSP engines like the new 2012 Honda Click125i eSP, Vario Techno 125 PGM-FI, etc...


**The Yuminashi Progressive 2-Valve Spring Racing Conversion set 14752-KWN-000 is required to avoid floating valves. If you don't pay attention to this, then the valves will start to float even before the electronic limiter kicks in.

Compression ratio: 12.8:1

Compatible with regular gasoline.   


The SH125i ABS (2013) 164CC LIGHT BORE KIT includes:

  • 1 x 60mm Aluminum cylinder
  • 1 x 60mm Top-End Light Bore Piston
  • 1 x 60mm Piston ring set
  • 1 x Piston pin (13 x 42mm)
  • 2 x Piston clip
  • 1 x 60mm Head gasket
  • 1 x Cylinder base gasket
  • 1 x Tensioner lifter gasket




PRICE: 222.00€ Exclusive V.A.T.