PCX125 HIGH PERFORMANCE FUEL INJECTOR

░ FOR PCX125 FIRST GENERATION

 Picture: High Performance Fuel Injector for 164cc PCX125

This High Performance Fuel Injector looks exactly the same as your genuine PCX125 fuel injector, and you only can see, or better said, feel, the difference once you have installed it on your First Generation PCX125 with the Yuminashi 164cc light bore kit and the YUMINASHI 31mm PGM-FI Throttle Body with Manifold Set.

If you use the standard PCX125 fuel injector, then you might have the experience that your engine runs better with a more restricted, a not so open open air filter, and if you are in an extreme case, then you might have better results even with the original air filter.

If you have this experience, then you are missing a serious potential on power, because if you have this experience at this moment with your PCX, then the reason for it is very simple because the flow capacity from your 125cc injector is to small and have a very hard time to compensate.

You can easily compare this with a carburetor with a main jet which is to small, the result will not only be a bad running engine, but also a hot running engine with a serious risk on blowing a hole in your piston.

If you install the High Performance Fuel Injector, then you will not only have solved this problem, but you will be able to use a complete open air filter, so that your engine receives not only more, but a very well balanced air/fuel mixture which means not only more power, but a better fuel economy a cooler running engine, and of course even more fun...

**The High Performance Fuel Injector is not recommended to use in a 125cc PCX125!...

PRODUCT CODE: 16450-KWN-001

PRICE: 1,520THB / 38,50€ Exclusive V.A.T.

31MM PGM-FI THROTTLE BODY SET

░ FOR PCX125 FIRST GENERATION

 Picture: 31mm PGM-FI Throttle Body Set for PCX125

This YUMINASHI 31mm PGM-FI Throttle Body has to be used in combination with the YUMINASHI 31mm PGM-FI Manifold Set for PCX125.

The venturi is machined in to a stack to optimise and achieve an improved velocity. The entire inside of the throttle body is mirror shine polished. The set comes complete as you can see here on the picture.

The PFM-FI 31mm throttle body and Manifold set are recommended to use on the YUMINASHI 164cc Light Bore or Big Bore Cylinder Kits and on the YUMINASHI 184cc Long Stroke Cylinder kit.

**For racing applications best performance will be achieved without air filter. For road use we recommend original air filter K&N R-1100.

Please use the "Detail" button to see more detailed pictures...

PRODUCT CODE: 16410-KWN-031

PRICE: 5,000THB / 128.00€ Exclusive V.A.T.