This specific set with the STD150 Head is mentioned for the First Generation PCX125 bikes.

The entire set will be plug and play ready with all details to be installed on the first generation PCX125 like the correct screw wire in the head to accept the first generation water temperature sensor (M12), a Next Generation eSP aluminum Cylinderhead Cover with rubber Gasket, 4 bolts for the cover, 2 x M7 Bolts for the Exhaust, 2 nuts M7 for the exhaust, a larger diameter exhaust gasket and the YUMINASHI special water cooling adaptor set which includes a eSP water hose joint pipe with the YUMINASHI water cooler adaptor hose to make the switch possible to install a new generation eSP head on your first generation PCX125 frame and water cooler.

The STD 150 Head comes naked without camshaft and valves.

Like this you can make your choice between the YUMINASHI steel STD150 eSP valves (14722-KZY-000) or the YUMINASHI Stainless STD150 eSP Racing valves (14722-KZY-001).

● The head is plug and play ready to accept the first generation PCX125 camshaft and rockers, this of course if you don't want to install also the new generation eSP dual bearing roller rockers and camshaft because both are possible to install in this cylinderhead.

 

**Please keep in mind that this cylinderhead need to be installed with a new generation eSP 125cc or 150cc exhaust system. You can also order the YUMINASHI adaptor set to install the first generation PCX125 exhaust on this next generation eSP cylinderhead!.....

 

 ****Highly recommended to install our PROGRESSIVE 2-VALVE SPRING RACING SET 14752-KZR-000.  

  

PRODUCT CODE: 12010-KWN-000

PRICE: 6,200THB / 157,00€ Exclusive V.A.T.